Technical Specifications for Public Improvement Projects
 
Technical Specifications for Public Improvement Projects
City of Gardner, Kansas
May 2007
 
  Section Page
  Book Cover  
  DESIGN CRITERIA FOR PUBLIC IMPROVEMENT PROJECTS i to DA/4-2
  Table of Contents ii to v
DCP Procedure for Public Improvement Project Plan Submittal DC/P-1 DC/P-2
DC1 General Plan Requirements for Public Improvement Projects DC/1-1 to DC/1-4
DC2 Design Criteria for Sanitary Sewers and Appurtenances DC/2-1 to DC/2-6
DC3 Design Criteria for Street Improvements DC/3-1 to DC/3-7
DC4 Design Criteria for Storm Drainage Facilities DC/4-1 to DC/4-4
DC5 Design Criteria for Water Line Construction DC/5-1 to DC/5-6
DC6 Requirements for Public Improvement Project Plan Preparation DC/6-1 to DC/6-7
DC7 Private Improvement Design Criteria DC/7-1 to DC/7-3
DC8 Private Improvement Plan Preparation DC/8-1 to DC/8-2
DA4 Design Aids DA/4-1 to DA/4-2
     
  TECHNICAL SPECIFICATIONS FOR PUBLIC IMPROVEMENT PROJECTS i toTS/80-3
  Table of Contents ii to x
GP General Provisions TS/GP-1 to TS/GP-9
1000 Site Preparation TS/10-1 to TS/10- 3
1100 Grading TS/11-1 to TS/11-6
1200 Subgrade Preparation TS/12-1 to TS/12-7 
1300 Asphaltic Concrete Pavement TS/13-1 to TS/13-7
1400 Portland Cement Concrete Pavement TS/14-1 to TS/14-8
2000 Concrete TS/20-1 to TS/20-9
2100 Concrete Curb, Curb and Gutter, Sidewalk, and Driveway Entrances  TS/21-1 to TS/21-2 
3000 Sanitary Sewers  TS/30-1 to TS/30-12 
3100 Sanitary Sewer Manholes TS/31-1 to TS/31-4
4000 Storm Sewers TS/40-1 to TS/40-4
5000 Water Lines TS/50-1 to TS/50-9
5100 Testing TS/51-1 to TS/51-3
5200 Disinfection TS/52-1 to TS/52-2
5300 Water Service Reconnections TS/53-1 to TS/53-3
6000 Excavation, Trenching, and Backfilling (Pipeline Construction) TS/60-1 to TS/60-12
6100 Blasting TS/61-1 to TS /61-8
7000 Restoration of Surface Construction TS/70-1 to TS/70-2
7100 Chain Link Fencing TS/71-1 to TS/71-3 
7200 Seeding and Sodding  TS/72-1 to TS/72-5
7300 Erosion Control TS/73-1 to TS/73-1
8000 Materials Testing TS/80-1 to TS/80-3
     
  STANDARD DETAILS in AutoCad and PDF formats  
 


Share |